SC5D is diesel fuel additive which is to be added in 1:2000 proportion in diesel.
It atomizes the fuel hence improves spray quality by injector in combustion chambers there by improving power generated by same quality of fuels.
Due to atomization by additive the load on piston of bosch pump or rotary pumps decreases. hence reduction in maintenance by ½” at bosch pumps can be achieved. By adding additive copper strip corrosion of diesel becomes negative hence diesel with additive acts as rust preventive and protects the fuel lines as well as tanks from corrosion.
Environment Effect : With SC5D in 1:2000 proportion exhaust of diesel vehicles can be reduced by 30 to 50% depending on servicing schedule of vehicle within the run of @ 400 to 500 kms.
The above proof indicates considerable reduction in SOx, NOX. in exhausts after 450kms. Hence load on catalytic the converters decreases there by increasing the life at silencer by @ 50%.
By above proofs it can be ascertained that at least saving of @ 5% in diesel consumption can be achieved easily which is more than 7 times the cost of additive there by cost to benefit of 1:7 in diesel consumption. Along with increase in life of vehicle & spare part as a bonus can be achieved.
Our experiments with our clients has shown that cost of additive can be retrieved in 1:2 proportion even with the cost of maintenance & down time.
Hence everybody who uses diesel should use SC5D because it is all profit deal for owners of vehicle as well as drivers.
Packing available 100ml bottles, ½ ltr, 1 ltr, 5 ltrs, 10 ltrs.
SC5D Diessl Additive Operative Instructions: For proportion of 1:2000 to 1:2500 Additive to diesel: - Monitor : RPM of vehicle before adding additive
- Monitor : RPM of vehicle after adding additive
- Monitor : Flue gases & before adding additive
- Monitor : Flue gases & after adding additive
Note down the differences in the log bookAdjust RPM to original level i.e. ideal RPM say if without additive is 1000 RPM and after additive is reach. 1200 RPM. Readjust it to 1000 RPM.
The monitoring is to be done by digital Accurate RPM meter.
Adjustment to be Done:- - If we adjust the RPM to original level the again take the reading of the flue gases after adjusting of RPM to original level & log it
Note the Change in mileage of vehicle after adjustment RPM to original level (1200 RPM to 1000 RPM)
- Oil consumption will also be reduced we can monitor that in oil drain i.e. oil consumed by vehicle per 1000 km is reduced by 30 to 50% Indicating lower engine Deposits & Increased engine life i.e. increased road worthiness of vehicle
